Extend Host Nework - TP-Link TL-WR941HP User Manual

Chapter 10
2. Select an option from the
the default settings unless necessary. If you select other options, configure the
related parameters according to the help page.
In addition
• Mode - Select a transmission mode according to your wireless client devices. It is
recommended to just leave it as default.
• Channel Width - Select a channel width (bandwidth) for the wireless network.
• Channel - Select an operating channel for the wireless network. It is recommended
to leave the channel to Auto, if you are not experiencing the intermittent wireless
connection issue.

10. 7. Extend Host Nework

If you want to extend another host network after Quick Setup when the router works as
a range extender, you can refer to this section.
1. Visit http://tplinkrepeater.net, and log in with the password you set for the router.
2. Go to Settings > Wireless
3. Enable Connect to 2.4GHz Network
networks.
4. Select the host network you want to extend.
Note:
If the network you want to extend is on but not listed, please try the following steps.
• Move the router closer to your host router, and click
• You can manually enter the SSID (network name) and password of the network you want to extend, and click Save.
5. Once a host network is selected, the SSID and security type will be automatically
filled in. If the selected network is encrypted, enter the password in the
field.
6. Click Save.
Security drop-down list. We recommend you don't change
> Connect to Network.
and click
Refresh in the top-right corner of the list.
Customize Your Network Settings
Wireless Scanner to find all available
Password
53