Access Point Mode - TP-Link TL-WR941HP User Manual

Chapter 2
Note: If the login page does not appear, please refer to the FAQ section.
3 ) After successful login, follow the step-by-step instructions to complete the
initial configuration.
Step 2: Relocate:
zone. The location you choose must be within the range of your existing host network.
Host Router
Step 3: Enjoy!
The extended network shares the same password as that of your host
network. If you have customized the SSID (network name) of the extended network,
connect to the new Wi-Fi.
2. 2. 4.

Access Point Mode

This mode transforms your existing wired network to a wireless one.
Internet LAN1 LAN2 LAN3
Internet LAN
Wired Host Router
1. Connect the router to your wired host router's Ethernet port via an Ethernet cable as
shown above and turn on the router.
2. Connect a computer to the router via an Ethernet cable or wirelessly by using the
SSID (network name) and password printed on the bottom label of the router.
Place the router between your host router and the Wi-Fi dead
Host Network
High Power Router
LAN4
High Power Router
Connect to the Internet
Extended Network
Internet
Devices
Devices
11