Change The Lan Settings; Configure To Support Iptv Service - TP-Link TL-WR941HP User Manual

Chapter 10

10. 1. Change the LAN Settings

The router is preset with a default LAN IP 192.168.0.1, which you can use to log in to
its web management page. The LAN IP address together with the Subnet Mask also
defines the subnet that the connected devices are on. If the IP address conflicts with
another device on your local network or your network requires a specific IP subnet, you
can change it.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Network > LAN.
3. Type in a new IP Address appropriate to your needs. And leave the
the default settings.
4. Click Save.
Note: If you have set the Virtual Server, DMZ or DHCP address reservation, and the new LAN IP address is not in the
same subnet with the old one, then you should reconfigure these features.

10. 2. Configure to Support IPTV Service

I want to:
How can
I do that?
Configure IPTV setup to enable Internet/IPTV/Phone service
provided by my internet service provider (ISP).
1. Visit http://tplinkwifi.net, and log in the password you set for
the router.
2. Go to Advanced >
3. If your ISP provides the networking service based on IGMP
technology, e.g., British Telecom(BT) and Talk Talk in UK:
1 ) Tick the IGMP Proxy
Version, either V2 or V3, as required by your ISP.
Customize Your Network Settings
Network > IPTV.
checkbox and select the
Subnet Mask as
IGMP
46