Selecting constant speed control mode
LC500_LC500h_QG_OM11444U_(U)
1
With the cruise control off, press and
hold the cruise control main switch for
1.5 seconds or more.
Immediately after the switch is pressed,
the radar cruise control indicator will
come on. Afterwards, it switches to the
cruise control indicator.
Switching to constant speed control
mode is only possible when operating
the switch with the cruise control off.
2
Accelerate or decelerate, with accelera-
tor pedal operation, to the desired vehi-
cle speed (at or above approximately
25 mph [40 km/h]) and press the -/SET
switch to set the speed.
Cruise control "SET" indicator will
come on.
The vehicle speed at the moment the
switch is released becomes the set
speed.
50