Hafm Appliance; Element Managerenabling Hafm To Manage The Director - HP StorageWorks Director 2/64 Installation Manual

Installing and Configuring the Director

HAFM Appliance

To run HAFM software, you must set up and configure the HAFM appliance.
Refer to the HP StorageWorks HA-Fabric Manager Appliance Installation Guide
for instructions on:
Enabling HAFM to Manage the Director
Element Manager
To manage a new director, it must be recognized by the HAFM application.
Follow these steps to enable HAFM to recognize a new director:
1. At the HAFM application, choose Discover > Setup. The Discover Setup
Figure 39: Discover Setup dialog box
2. Click Add. The Domain Information dialog box displays with the IP Address
78
Setting up the HAFM appliance
Connecting the HAFM appliance to the LAN
Configuring the network addresses and passwords for the HAFM appliance
Setting HAFM appliance date and time
Configuring and enabling event notification features
Creating HAFM user names and passwords
dialog box displays, as shown in
page open, as shown in
Figure 39.
Figure 40.
Director 2/64 Installation Guide