Ctcss Deviation - Vertex Standard VX-450 series Service Manual

Alignment
CTCSS D <W
EVIATION
This parameter is to align CTCSS Deviation of the selected channel.
1. Press the "CTC Dev (W / N)" button to start the
alignment.
The CTCSS Deviation Alignment window will
appear.
2. Click the left mouse button on the slide bar or
press the Up / Down arrow key, to select the de-
sired channel.
3. Click the "PTT" button or press the "SPACE" bar
the radio starts to transmit with CTCSS tone on
the selected channel.
4. Set the value to get desired deviation on the de-
viation meter by dragging the slide bar, clicking
the up-down button, pressing the left or right ar-
row key, or entering the value in the entry box on
the selected channel..
5. After getting the desired deviation (Wide: 0.6 kHz,
Narrow: 0.3 kHz) click the "PTT" button or press
"SPACE" bar to stop transmitting.
6. Click the "OK" button to finish the CTCSS De-
viation alignment and save the data.
ADJ Type
Basic: "Low-edge / band center / high-edge"
and select the channel for alignment
(Default).
Single : Alignment value changes only on the
selected channel.
All Freq : Alignment value changes on all chan-
nels.
VX-450 Series UHF Band Service Manual
> / <N >
IDE ARROW
39