Wiring The Terminal Block - Siemens SIMATIC ET 200eco PN Operating Instructions Manual

3.7

Wiring the terminal block

Tools required
You need a medium-sized cross-tip screwdriver to screw on the terminal block and a slotted
screwdriver to press down the insulation displacement terminals.
Wiring the connectors
You do not have to strip the cables. They are striped automatically when you press down the
insulation displacement terminals.
Figure 3-4
ET 200eco PN
Operating Instructions, 08/2016, A5E01250250-AJ
Wiring the terminal block
Wiring
3.7 Wiring the terminal block
59