Honda GL1100 Owner's Manual page 26

Engine Stop Switch
The three position engine stop switch
(I)
is next to the throttle grip. In
RUN,
the engine will operate. In either OFF
position the engine will not operate. This
switch is intended primarily as a safety or
emergency switch and should normally
remain in RUN
NOTE:
If your motorcycle is stopped with the
ignition switch ON and the engine stop
switch OFF. the headlight and taillight
will still be on, resulting in battery dis-
charge.
Starter Button
The starter button (2) is below the engine
stop switch (I').
When the starter button is pressed the
starter motor will crank the engine and the
headlight will automatically go out during
starting, but the taillight will stay on.
See pages 34-35 for the starting pro-
cedure.
(1)
Engine
stop switch (2)
Starter
button _ _ _ _ _ _ _.21