Stack Cabling - Cisco Catalyst 2960-X Hardware Installation Manual

Switch Installation

Stack Cabling

Stack Cabling
Stacking using FlexStack-Plus Modules
These figures show the switches stacked in a vertical rack or on a table. The connections are redundant. A
Catalyst 2960-X switch is shown in the examples, the Catalyst 2960-XR switch can be stacked in the same
way.
Figure 1: Stacking Switches with the 0.5-meter FlexStack Cable
Figure 2: Stacking Switches with 0.5-meter and 3-meter FlexStack Cables
Stacking using FlexStack-Extended Modules
This section explains the supported stacking topologies using FlexStack-Extended Modules.
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
OL-28309-02 9