Cisco Catalyst 2960-X Hardware Installation Manual page 27

Switch Installation
2 Smaller sleeve for thin power cords
Step 4 Slide the retainer through the other latches to lock it.
Figure 21: Locking the Retainer
1 AC power cord
2 Sleeve for thin power cords
Step 5 (Optional) Use the small sleeve for thin power cords. Use the small sleeve to provide greater stability for thin
cords. Detach the sleeve, and slide it over the power cord.
Figure 22: Sleeve Around the Power Cord
1 Sleeve for thin power cords
OL-28309-02
Installing the Power Cord Retainer (Optional)
3 Latches
2 AC power cord
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
27