Adjustment; Before Adjustment - Sanyo PDP-32H1ES Service Manual

■ Adjustment

The each circuit has been made by the fine adjustment at factory. Do not attempt to adjust
the following adjustments except requiring the readjustments in servicing otherwise it may
cause loss of performance and product safety.

Before Adjustment

This adjustment is done to enter Service Mode by Remote
Control Unit with Multimedia Controller (PDP-SE01)
■ To enter Service Mode
Quick operation is needed to enter Service Mode.
(1) Turn the monitor on.
(2) Press and hold the MENU button on the monitor.
(3) Keep item (2) and press the EXIT button and
release the EXIT button and the MENU button in
order.
(4) After item (3), immediately press the MUTE but-
ton to appear the Service Mode Display.
■ Service Mode Display
Feb-Dynamic
0 Cont
■ To return to the Normal Mode
Once turn the Monitor off by pressing "POWER" button on the monitor or remote control unit and turn it on again.
CAUTION
63 (3F)
32
Main
035
Sub
019
PDP Time 001396
To enter
Service Mode
EXIT
MUTE
MENU Button
.
OK
MENU INPUT VOLUME
(←) / (→)
To select :
Adjustment Item
or Data Setting
VOLUME
MUTE
-15-
(↑)
●
Adjustment :
UP
●
Data Setting
+
( )
OK
EXIT
(↓)
●
Adjustment :
DOWN
●
Data Setting
–
( )