Advertisement
Modify the diagram to remove the line below "A"
A) Universal Wireless AV Adapter Status Light
Your Adapter's status is shown by the light on the front.
Off: The Adapter is not plugged into a power source.
Blinking Blue: The Adapter is starting up.
Blinking Blue/Amber: Indicates the Adapter needs to be set up.
Solid Blue: The Adapter is connected to the Wi-Fi® network.
Solid Amber: The Adapter is connected to the Wi-Fi network, but the signal
is weak. You may experience performance problems. Consider moving the
Adapter closer to the wireless router.
Blinking Amber:
The Adapter is not connected to the Wi-Fi network. Check to make sure
that your wireless router is functioning properly, and/or move the
Adapter closer to the wireless router.
Advertisement
