Notes Of Connection - Blaupunkt Los Angeles 510 Operating And Installation Instructions

Notes of connection

• This unit is designed to be used in a vehicle with a 12-volt battery and negative grounding. Before
installing this unit to a recreational vehicle, a bus, or a truck, make sure the battery voltage is
appropriate for this unit to be used, otherwise, have a professionally installed transformer to convert
the output voltage to 12V.
• To avoid short circuit in the electrical system, ensure that the negative battery cable is disconnected
before installation.
• To prevent short circuit in the wiring and damaging to this unit, secure all wirings with cable clamp or
adhesive tape. Route the wirings in a secured, out of heating place without touching any moving parts
• Never pass the yellow power cord through the installation hole into the engine compartment and
connect to the car battery. Otherwise, a high possibility of serious short circuit to the electrical system
may occur.
• If you need to replace the fuse, please replace with a 15A fuse. Using no fuse or a fuse with an
improper rating may cause damage to the unit or a potential re. If a proper fuse is installed and
problems continue to occur, please contact your local retailer or installer.
• DO NOT connect other equipments with the car battery to avoid battery overheating.
• Please make sure all the wiring connections & the cables of the speakers are well-insulated. Otherwise,
this unit may be damaged by short circuit.
• If there is no ACC available, please connect ACC lead to the power supply with a switch.
•
•
Notes of connection
18