Environment Requirements; Hardware Installation - TP-Link M7300 User Manual

Device powered on, remove the cover. Use a pin to press and hold the Reset button until
all LEDs turn on momentarily.

1.4 Environment Requirements

Place the Device in a well-ventilated place far from any heater or heating vent

Avoid direct irradiation of any strong light (such as sunlight)

Operating Temperature: 0℃ ~35℃ (32℉~95℉)

Operating Humidity: 10%~90%RH, Non-condensing


1.5 Hardware Installation

STEP 1: Install SIM card and memory card.
1) Open the cover upwards (as the arrow shows).
2) Make sure to have the SIM card's metal chip downwards and the triangle notch outwards,
and then slide the card into its slot (in the direction as the arrow shows).

Note:
If you have a Micro-SIM or Nano-SIM, please use an adapter to convert it to a standard SIM
card.
3) First, push and then lift the Micro-SD card locker to open it. Second, have the memory
card's metal chip downwards and inwards, and then fit it in its slot. Finally, put down and
then pull the locker to lock it.
M7300 LTE-Advanced Mobile Wi-Fi User Guide
-4-