Cross-Band; Troubleshooting - Belkin F9K1127 User Manual

blocked. Try to keep the signal strength between 60% and 100% for optimum
performance.
7. Security—Displays the mode of security in use by the neighboring APs. If a network
supports Wi-Fi Protected Setup, the Wi-Fi Protected Setup icon is also displayed.
To connect your extender with an access point or router in Site Survey, you will
need to know the password or passphrase of the network on that device.
1. Select the network name (SSID) that you want to repeat with your extender by
clicking the corresponding button in the Select column.
2. Click Connect. When prompted, enter the password or passphrase used to secure
your wireless network. The type of security information required in this screen must
match your access point or router's wireless security settings.
TIP: For dual-band networks, be sure to connect to both bands, 2.4 GHz and 5 GHz.
3. Click Save. Your extender wireless parameters should be configured. The wireless
interface will restart, and the extender will connect to the access point or router you
have chosen.
__

Cross-Band

Cross-Band is the simultaneous use of both bands for high-speed data transfer and
uninterrupted streaming and gaming.
__

Troubleshooting

NOTE Your F9K1127/F9K1126 works on 2.4GHz and 5 GHz networks.
You cannot get your extender connected
Check the position of your router and extender
 For first-time setup, you may need to place the extender closer to the router.
After you've set up your extender, you can unplug it and move it to the final
location.
 To reduce signal obstructions, try alternate locations for the router and extender.
 Avoid placing the router and extender near metal objects, masonry walls,
and reflective surfaces such as glass or mirrors.
 Avoid placing the router and extender near other electronics that may
cause signal interference.