Character Entry - Kenwood TS-590SG Instruction Manual

CHARACTER ENTRY

on the display.
1 Move the cursor to the left or right by pressing
[Q-M.IN] or [Q-MR].
2 Turn the MULTI/CH control or press [M.IN]/ [SCAN
(SG.SEL)] to select your desired character.
pressing [CL].
3
characters.
4 Press [MENU] to set the entry and to exit character
entry mode.
[CLR] at any time to cancel character
entry mode and return to the Menu selection.
Available alphanumeric characters:
Y Z (space) + – / 0 1 2 3 4 5 6 7 8 9
Note:
MENU SETUP 4
21