Configuring The Switch For Secure Shell - Cisco Catalyst 2975 Software Configuration Manual

Chapter 9 Configuring Switch-Based Authentication
Command
Step 6
username name [privilege level]
{password encryption-type
password}
Step 7
end
Step 8 show running-config
Step 9 copy running-config startup-config (Optional) Save your entries in the configuration file.
To disable AAA, use the no aaa new-model global configuration command. To disable authorization,
use the no aaa authorization {network | exec} method1 global configuration command.
To secure the switch for HTTP access by using AAA methods, you must configure the switch with the
Note
ip http authentication aaa global configuration command. Configuring AAA authentication does not
secure the switch for HTTP access by using AAA methods.
For more information about the ip http authentication command, see the Cisco IOS Security Command
Reference, Release 12.2.

Configuring the Switch for Secure Shell

This section describes how to configure the Secure Shell (SSH) feature. To use this feature, you must
install the cryptographic (encrypted) software image on your switch. You must obtain authorization to
use this feature and to download the cryptographic software files from Cisco.com. For more information,
see the release notes for this release.
These sections contain this information:
•
•
•
OL-19720-02
Purpose
Enter the local database, and establish a username-based authentication
system.
Repeat this command for each user.
• For name, specify the user ID as one word. Spaces and quotation marks
are not allowed.
• (Optional) For level, specify the privilege level the user has after gaining
access. The range is 0 to 15. Level 15 gives privileged EXEC mode
access. Level 0 gives user EXEC mode access.
For encryption-type, enter 0 to specify that an unencrypted password
•
follows. Enter 7 to specify that a hidden password follows.
For password, specify the password the user must enter to gain access to
•
the switch. The password must be from 1 to 25 characters, can contain
embedded spaces, and must be the last option specified in the username
command.
Return to privileged EXEC mode.
Verify your entries.
Understanding SSH, page 9-42
Configuring SSH, page 9-43
Displaying the SSH Configuration and Status, page 9-45
Configuring the Switch for Secure Shell
Catalyst 2975 Switch Software Configuration Guide
9-41