Interior Shelves; Maintenance - U-Line 2224BEV User Manual & Service Manual

USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

Interior Shelves

REMOVING AND INSTALLING GLASS SHELVES
Adjusting Interior Shelves
Models equipped with glass shelves have an adjustable
mounting system. To adjust or simply remove shelves
for cleaning, follow the instructions below.
1. Remove all product from shelf.
2. Coming from underneath the shelf, lift both the
front and rear of the glass.
3. Carefully slide shelf out of unit being careful not to
scratch the interior liner.
4. Installation is the reverse of removal.
Adjusting Shelf Height
Shelf height may be adjusted to accommodate a
broad range of product. To alter your shelf spacing
follow the instructions below.
1. Remove the 4 Shelf clips from the shelf clip holes.
2. Move shelf clips as a group to the desired shelf
height.
3. Insert shelf clips into the holes of the desired shelf
height. Be certain shelf clip is fully seated into
shelf clip hole.
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS •
Recommended Wine Storage 1
CAUTION
Clips MUST be installed with the ribbed side
down. Failure to do so may result in shelf or unit
damage.
NOTICE
All 4 shelf clips for each shelf must be installed
at the same height for shelf stability.
4. Reinstall shelf.
Cleaning Shelves
Shelves may be cleaned in a soapy warm water
solution. A general household disinfectant may be
used if necessary. Be sure to completely dry your
shelf before reinstalling.

MAINTENANCE

u-line.com
• SERVICE
Interior Shelves 1