Configuration - Mackie Thump12BST Owner's Manual

MIXER MODE BT

Configuration

This is where to configure each speaker's LED status,
auto connect / link bluetooth and more.
CONFIG LOCK LCD
MIXER MODE BT
CONFIG LOCK LCD
This is similar to what you will see after first entering
the configuration screen.
CONFIG
Front LED: OFF
Auto Pair BT: OFF
Auto Link BT: OFF
About
Restore
To change a setting, you will just need to rotate the
speaker control knob until the configuration you desire
to change is illuminated, then push to select it.
These are the choices from top to bottom:
Front LED – Decide if you want the front LED
on or off. When illuminated, push the speaker
control knob to select between on or off.
CONFIG
Front LED: ON
Auto Pair BT: OFF
Auto Link BT: OFF
About
Restore
On
Auto Pair BT – Allows a previously paired device
to auto reconnect if both the device and speaker
are powered on and in range. When illuminated,
push the speaker control knob to select between
on or off.
CONFIG
Front LED: OFF
Auto Pair BT: ON
Auto Link BT: OFF
About
Restore
On
MIXER MODE BT
CONFIG LOCK LCD
MIXER MODE BT
CONFIG LOCK LCD
CONFIG
Front LED: OFF
Auto Pair BT: OFF
Auto Link BT: OFF
About
Restore
Off
CONFIG
Front LED: OFF
Auto Pair BT: OFF
Auto Link BT: OFF
About
Restore
Off
MIXER MODE BT
Auto Link BT – Allows two previously paired
speakers to automatically re-link if both are powered
on and in range. When illuminated, push the speaker
CONFIG LOCK LCD
control knob to select between on or off.
CONFIG
Front LED: OFF
Auto Pair BT: MIXER MODE BT OFF
Auto Link BT: ON
About
CONFIG LOCK LCD
Restore
On
About – Displays the current information about
your loudspeaker. There is really only one reason
to go here and that is if you've been directed so
by Technical Support.
CONFIG
Front LED: OFF
Auto Pair BT: OFF
Auto Link BT: OFF
About
Restore
Restore – Restores all parameters back to their
default. This is a permanent reset with no undo,
so a confirmation dialog helps prevent accidents.
RESTORE
FACTORY
DEFAULTS?
YES NO
Yes
Illuminating and selecting the left-facing arrow
returns you to the previous screen.
CONFIG
Front LED: OFF
Auto Pair BT: OFF
Auto Link BT: OFF
About
Restore
Off
ABOUT
Firmware: v0.1.48
DSP: 15.3.03
BT: 1.14.54
ID: 00:12:6F:D6:85:0A
RESTORE
FACTORY
DEFAULTS?
YES NO
No
Owner's Manual
17