Table of Contents
Advertisement
LOAD LEVELING SYSTEM
— IF EQUIPPED
The automatic load leveling system will provide a
level-riding vehicle under most passenger and
cargo loading conditions.
A hydraulic pump contained within the shock ab-
sorbers raises the rear of the vehicle to the correct
height. It takes approximately 1 mile (1.6 km) of
driving for the leveling to complete depending on
road surface conditions.
If the leveled vehicle is not moved for approximately
15 hours, the leveling system will bleed itself down. The
vehicle must be driven to reset the system.
44
UNIVERSAL GARAGE
DOOR OPENER
(HOMELINK )
HomeLink Buttons And Indicator Light
• HomeLink replaces up to three hand-held trans-
mitters that operate devices such as garage door
openers, motorized gates, lighting or home secu-
rity systems. The HomeLink unit is powered by
your vehicles 12 Volt battery.
• The HomeLink buttons that are located in the
overhead console or sunvisor designate the three
different HomeLink channels.
• To operate HomeLink, push and release any of the
programmed HomeLink buttons. These buttons
will activate the devices they are programmed to
with each press of the corresponding HomeLink
button.
• The HomeLink indicator light is located above the
center button.
Before You Begin Programming
HomeLink
For efficient programming and accurate transmis-
sion of the radio-frequency signal, it is recom-
mended that a new battery be placed in the hand-
held transmitter of the device that is being
programmed to the HomeLink system. Make sure
your hand-held transmitter is programmed to acti-
vate the device you are trying to program your
HomeLink button to.
Ensure that your vehicle is parked outside of the
garage before you begin programming.
It is recommended that you erase all the channels of
your HomeLink before you use it for the first time.
If you have any problems, or require assistance,
please call toll-free 1-800-355-3515 or, on the Inter-
net at HomeLink.com for information or assistance.
Advertisement
Chapters
Table of Contents
