Power Sunshade - If Equipped; Load Leveling System - If Equipped - Chrysler 300 2015 Operating Information Manual

Power Sunshade — If Equipped
Your vehicle may be equipped with a power
sunshade that will reduce the amount of sun-
light that will shine through the rear windshield.
The power sunshade can be operated using the
Uconnect® System.
Push the "Controls" button and then push the
"Rear Sunshade" button to raise the power
sunscreen. Push the "Sunshade" button a sec-
ond time to lower the sunshade.
If the sunshade is in the raised position and the
vehicle is placed in REVERSE, the sunshade
will automatically fully lower. When the trans-
mission is shifted out of REVERSE the sun-
shade will automatically return to the fully raised
position after a brief delay.
NOTE:
The rear sunshade control switch can be
locked out along with the rear passenger
window controls from the driver switch win-
dow lockout switch.
142
The power sunshade can also be operated by
passengers in the rears seats. The power sun-
shade switch is located on the back of the
center console between the heated seat
switches. Push the switch once to raise the
sunshade. Push the switch a second time to
lower the sunshade.
Power Sunshade Switch
LOAD LEVELING SYSTEM —
IF EQUIPPED
The automatic load leveling system will provide
a level-riding vehicle under most passenger and
cargo loading conditions.
A hydraulic pump contained within the shock
absorbers raises the rear of the vehicle to the
correct height. It takes approximately 1 mile
(1.6 km) of driving for the leveling to complete
depending on road surface conditions.
If the leveled vehicle is not moved for approxi-
mately 15 hours, the leveling system will bleed
itself down. The vehicle must be driven to reset
the system.