Avidyne IFD540 Pilot's Manual page 41

Pressing it a 2
over the Arrival field and present a drop down box
of available published arrivals. Each subsequent
press of the "PROC" key will step through all
following destination airfield approaches and
arrivals in the flight plan and wrap back around to
the top of the flight plan. When the drop down box
appears over the intended data field, twist the
bottom right IFD knob to scroll up or down the list
until the desired procedure is highlighted and then
push the knob in to add that procedure to the flight
plan.
"PROC" key will present the FPL tab with an insert
cursor at the top of the page but will not present
any procedures.
Enter – The use can vary slightly depending on
•
the scenario, but "ENTR" is always related to the
Enter/Accept/Confirm use;
Clear – The use can vary slightly depending on
•
the scenario, but "CLR" is always related to
Clear/Backspace/CAS Message Clear use.
System Overview
nd
time will step the reverse video
If there is no flight plan, pressing the
1-33