Automatic Summertime; Key Lock - Wolf BML Operating Instructions Manual

Automatic summer time
Basic settings
Back
Language
Date
Time
Autom. summert.

Key lock

Z1 Hall1
Factory setting: auto.
Options: auto / off
Key lock
Basic settings
Back
Language
Date
Time
Autom. summert.
Key lock
Z1 Hall1
Factory setting: off
Options: on / off
Please note
18
Control level 2 - Default settings
Turn the r.h. rotary selector further clockwise to select the „Autom.
summert." parameter and confirm the selection by pressing the
r.h. rotary selector again.
„Automatic summertime" is disabled by turning the r.h. rotary
selector and by pressing to confirm.
Press the r.h. rotary selector to change to control level 2. Turn
the r.h. rotary selector clockwise to select the "Default settings"
menu level and confirm the selection by pressing the r.h. rotary
selector again. Select the "Key lock" parameter by turning the
rotary selector further clockwise, and press selector to confirm.
The key lock is activated by turning the r.h. rotary selector and by
pressing to confirm.
You can cancel your input by pressing the „Speed adjustment key" .
Note:
The key lock parameter is intended to prevent unintentional
adjustment of the ventilation system.
If the key lock parameter is set to "ON", the key lock will be activated
automatically one minute after the last adjustment.
No adjustments or scans can be implemented when the key lock
is enabled. If, nevertheless, a key or rotary selector is activated,
then the display shows KEY LOCK.
The key lock can be lifted for a single adjustment or to display
the set/actual values by holding down the r.h. rotary selector for
approx. three seconds.
To disable the key lock permanently, the "Key lock" parameter
must be set to "Off" again.
Function keys remain active
Speed adjust , fresh air proportion adjustment and temperature
correction).
3063527_201308