Language; Date; Time - Wolf BML Operating Instructions Manual

Language

Basic settings
Back
Language

Date

Time

Autom. summert.
Key lock
Z1 Hall1
Factory setting: German
Options: German / English
French / Dutch
Date
Basic settings
Back
Language
Date
Time
Autom. summert.
Key lock
Z1 Hall1
Time
Basic settings
Back
Language
Date
Time
Autom. summert.
Key lock
Z1 Hall1
3063527_201308
Control level 2 - Default settings
Press the r.h. rotary selector to change to control level 2.
Turn the r.h. rotary selector clockwise to select the "Default
settings" menu level and confirm the selection by pressing the
r.h. rotary selector again.
Select the Language parameter by turning the rotary selector
further clockwise, and confirm your selection by pressing the
selector again.
The language is changed by turning the r.h. rotary selector and
pressing to confirm.
You can cancel your input by pressing the „Speed adjustment
key ".
Press the r.h. rotary selector to change to control level 2.
Turn the r.h. rotary selector clockwise to select the "Default settings"
menu level and confirm the selection by pressing the r.h. rotary
selector again. Select the Date parameter by turning the rotary
selector further clockwise, and press selector to confirm.
Turn the r.h. rotary selector to change the date.
Enter the day, month and year one after the other, pressing the
r.h. rotary selector each time to confirm.
You can cancel your input by pressing the „Speed adjustment key".
The date will be displayed automatically if a radio clock module is
connected. However, the date cannot then be changed.
Press the r.h. rotary selector to change to control level 2. Turn the
r.h. rotary selector clockwise to select the "Default settings" menu
and confirm the selection by pressing the r.h. rotary selector again.
Select the Time parameter by turning the rotary selector further
clockwise, and press selector to confirm.
Then turn the r.h. rotary selector to change the time.
Enter the hours, minutes and seconds one after the other, pressing
the r.h. rotary selector each time to confirm.
You can cancel your input by pressing the „Speed adjustment key".
You must set the time again if the control unit has been disconnected
from the power supply longer than 48 hours.
The time will be displayed automatically if a radio clock module is
connected. However, the time cannot then be changed.
17