Summary of Contents for Tunturi Platinum Dip Station
Page 1
Revision 0 September 2010 Dip Station Owner’s Manual Record Serial Number Here Platinum by Tunturi Date of Purchase www.tunturi.fi www.tunturi.com Dip Station Owner's Manual...
Congratulations on the purchase of your new Tunturi Dip Station. This gym will provide you with a lifetime of enjoyment to meet your strength training needs. Platinum by Tunturi strives to build the best quality gyms and to package these gyms in such a way to avoid any damage during shipping.
Page 3
3/8”-16 x 1 1/2” **17 1-1/4” Grip Collar **18 1-1/4” Grip Cap ITEM NO. DESCRIPTION QTY. **19 1-1/4” Grip Sleeve Forearm Pad Back Pad Tools Required 9/16” Wrench 9/16” Ratchet Tape Measure Dip Station Owner's Manual www.tunturi.fi...
Hardware Comparison Drawings—These drawings represent hardware used generally ni Platinum Strength products. To check the exact measures or size of a component, please compare to the images below. Bolt Length Note: Bolt length is measured from the underside of the head of the bolt. Platinum by Tunturi Dip Station Owner's Manual...
Page 5
Dip Station Owner's Manual www.tunturi.fi...
Page 6
Platinum by Tunturi Dip Station Owner's Manual...
Description Figure 1 Left Side Frame Right Side Frame Lower Cross Member Back Pad Connector Plate 3/8" Flat Washer (Black) Anti-Deflection 3/8"-16 Nylock (Black) HCS 3/8"-16 x 3" P5 3/8”-16 x 1 1/2” Platinum by Tunturi Dip Station Owner's Manual...
Page 9
FHSCS 3/8” x 1” HCS 3/8"-16 x 5 1/4" P5 Figure 2 Diamond Foot Plate HCS 3/8"-16 x 1 1/2" P5 Forearm Pad All Flat Washers and Nylocks are 3/8” unless otherwise noted. Back Pad Dip Station Owner's Manual www.tunturi.fi...
Preventive Maintenance Platinum by Tunturi strives to give you the very best in quality, performance and safety through carefully engineered designs and excellent workmanship. In order to maintain this high level of quality the preventative maintenance schedule below should be followed.
Page 11
Layout Diagram The Dip Station has a layout dimension of 3’-0” (width) x 2’-3” (length) x 5’-3” (height). There should be a minimum of 18”, preferably 24”, of working space around the entire unit. Dip Station Owner's Manual www.tunturi.fi...