Acer B1-720 Service Manual page 39

NOTE:
- In the next step you need to click Start button, to begin with the download but by default, the
first time you use the CSD tool, the Start button is grayed out. In order to start downloading
the file, meanwhile you need to power off your PAD.
- Make sure your PC/notebook is not yet connected to the PAD via MicroUSB cable.
Power off the PAD.
4.
Connect the PAD and PC/notebook via the Micro USB cable.
5.
In CSD tool, click Start button, to begin with the download.
6.
Wait until the DL PASS status appears on screen.
7.
Disconnect the PAD from your PC/notebook.
8.
The DL is complete.
To exit the CSD DL Tool(WIFI) tool, click Close on the left lower corner of the interface and
9.
then press Enter.
Diagnostic Utilities
Figure 2-22. Downloading Scatter File
Figure 2-23. DL Is Complete
Figure 2-24. Closing the Tool Interface
2-14