Ethernet; Suitable Cables For Power Supply And Ethernet - Siemens SIMATIC NET SCALANCE W760 Operating Instructions Manual

Connection

5.3 Ethernet

5.3 Ethernet
The SCALANCE W760/W720 has two Ethernet interfaces located on the underside of the
device (position
5.4

Suitable cables for power supply and Ethernet

Cable specification
The following table lists the requirements for a cable depending on the application.
Application
Direct 24 VDC supply
Ethernet
20
①
).
Specification
Round cable cross-section with
•
6 to 8 mm diameter.
Two-wire cable with 0.5 to 1.5 mm
per wire.
Permitted tensile load at least
•
100 N.
UL listing: Type PLTC or ITC
•
1. IE FC TP standard cable GP 2 x 2 (type A)
Order no.: 6XV1 840-2AH10
2. IE TP torsion cable 2 x 2 (type C)
Order no.: 6XV1 870-2F
3. IE FC TP trailing cable 2 x 2 (type C)
Order no.: 6XV1 840 3AH10
UL listing: Type PLTC or ITC (the three named types
have this approval)
Operating Instructions, 03/2015, C79000-G8976-C322-05
cross-section
2
SCALANCE W760/W720