Advertisement
If you dial local calls using only seven digits (area code not required), you can
program your home area code so that when you receive a call within your local area,
the telephone number is automatically stored in the call log without the area code.
1.
Press
when the base unit is not in use.
2.
Press
or
to scroll to
3.
Press
or
to scroll to
4.
The base unit displays
Use the dialing keys to enter the 3-digit area code.
•
Press
or
to move the cursor to the left or right.
•
Press
to erase a digit.
•
Press and hold
5.
Press
to save your selection. The screen shows
briefly. You hear a confirmation tone.
The default settings of the loop gain feature is
callers cannot hear you well, and you are using a public switched telephone network
(PSTN) line.
1.
Press
when the base unit is not in use.
2.
Press
or
to scroll to
3.
Press
or
to scroll to
4.
Press
or
to choose
5.
Press
to save your selection. You hear a confirmation tone.
Turn the loop gain feature back to
experiencing any new audio issues like echo or dropout.
, and then press
, and then press
to erase all digits.
. Turn this feature on only when the
, and then press
, and then press
or
if the callers cannot observe any improvement or are
14
.
.
briefly and then
.
.
.
.
Advertisement
