Table of Contents
Advertisement
6.
From the
Connection Method
Figure 14.
Connection Method Menu on the Add Device Window
7.
Depending on the connection method that you selected, additional options appear.
Make the appropriate selections for your connection method.
RS-232: Select the appropriate options from the
•
(this information is provided by your system administrator).
Figure 15.
RS-232 Drop-down Menus on Add Device Window
USB: Only the
•
Extron USB Device_0
menu. Make sure that it is selected.
Devices
8.
Click
. If the connection is successful,
Connect
section, followed by a green check mark (see
Connected Device
page 25).
drop-down menu, select
RS-232
Com Port
option is available on the
2
appears in green in the
SW
DP
SW2 DP • Remote Configuration and Control
or
.
USB
and
menus
Baud Rate
Available
figure 17
on
23
23
23
Advertisement
Table of Contents
