John Lewis JLBIWM1403 User Manual page 37

1
B
Washing Machine User Manual
2
A
A
B
C
Hinges
To mount the hinges it is necessary to drill two holes
(dia. 35 mm, depth12.5-14 mm depending on the depth
of door furniture) on the inner side of the door.
The distance between the hole fixing centres must be
416 mm. The distance from upper edge of the door to
the centre of the hole depends on the adjacent
furniture's dimensions.
The hinges will be fixed to the door by means of screws
for wood 1 and 2 supplied with the appliance.
Mounting the door
Warning! Do not remove the
screw B.
Fix the hinges to the appliance by means of the M5x15
screws.
The hinges can be adjusted to compensate for possible
uneven thickness of the door.
To align the door perfectly it is necessary to loosen the
screw, adjust the door and tighten the screw A again.
Counter-magnet
Warning! Do not remove the
screw B.
The appliance is pre set for a magnetic door closure. To
position the closure correctly, it is necessary to screw
the counter-magnet A (steel disk + rubber ring) into the
inner side of the door.
Its position must correspond to the magnet B on the
appliance.
37