Troubleshooting - Bosch MUZ9MX1 Instruction Manual

Hide thumbs Also See for MUZ9MX1:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 3
Fruit sundae
  – 250 g fruit (e.g. strawberries, bananas, 
oranges, apples)
  – 50-100 g sugar
  – 500 ml cold water
  – Ice cream as required
  ■ Peel the fruit and cut into pieces.
  ■ Put all ingredients (except the ice) into 
the blender and blend for 1 minute at 
setting r or 7.
  ■ Serve with the ice cream if wished.
Sporty cocktail
  – 2-3 oranges (approx. 600 g)
  – 1-2 lemons (approx. 150 g)
  – ½-1 tbsp sugar or honey
  – ¼ l apple juice
  – ¼ l mineral water
  – Ice cubes as required
  ■ Peel the oranges and lemons and cut 
into pieces.
  ■ Put all ingredients (except the apple 
juice and mineral water) in the blender 
jug.
  ■ Blend for 1 minute at setting r or 7.
  ■ Add the apple juice and mineral water
  ■ Blend briefly at setting r until the drink 
is frothy.
  ■ Pour the cocktail into glasses and serve 
as required with ice cubes.
Red fruit pudding
  – 400 g fruit (pitted sour cherries, 
raspberries, black/red currants, 
strawberries, blackberries)
  – 100 ml sour cherry juice
  – 100 ml red wine
  – 80 g sugar
  – 1 sachet vanilla sugar
  – 2 tbsp lemon juice
  – 1 generous pinch cloves (ground)
  – 1 pinch of cinnamon (ground)
  – 8 sheets gelatine
  ■ Soak the gelatine in cold water for 
approx. 10 minutes.
  ■ Bring all the ingredients (except the 
gelatine) to the boil.
  ■ Squeeze out the gelatine and melt in 
the microwave, but do not cook.
  ■ Blend the hot fruit and gelatine at 
setting 1 for approx. 1 minute.
  ■ Pour the red fruit pudding into small 
bowls rinsed out with cold water and 
chill.
Tip: Red fruit pudding tastes good with 
whipped cream or vanilla sauce.

Troubleshooting

Fault:
It is not possible to fit and secure the 
attachment to the red drive. 
Remedy:
  ■ Place the blade holder on the container 
and secure by rotating as far as 
  p ossible. The handle must be exactly 
aligned with the marking E.
Fault: 
Liquid is leaking from the blender at the 
blade holder.
Remedy:
  ■ Is the seal fitted to the blade insert?
  ■ Check the seal is fitted properly.
Important: If a fault cannot be eliminated, 
please contact customer service.
Subject to change without notice.
Troubleshooting
en
7

Advertisement

Table of Contents
loading

Table of Contents