Charging The Ot-100 / Battery In The Cradle - Partner OT-100 User Manual

Charging the OT-100 / battery in the cradle

You can charge the battery in the cradle that is more convenient. You can charge a spare battery (optional)
individually or simultaneously as well.
1. Plug the AC adapter power cord into an electrical outlet, then connect the DC plug of the adapter cable to
the power jack at the back of cradle.
2. Align the cradle connector on the OT-100 with the pins in the OT-100 slot of the cradle, then install the
OT-100 in the direction of the arrow.
3. Align the battery connectors on the battery with the pins in the second battery slot of the cradle, then
install the battery in the direction of the arrow.
4. After charging, unplug the cradle and remove the OT-100 / battery from it.
IMPORTANT
The LED indicator on the cradle will light while the OT-100 / battery is
charging. It will off when the charge is complete.
NOTE
Charge the battery within a temperature range 0˚C to 45˚C.
NOTE
12 C H A P T E R 1 G E T T I N G S T A R T E D
To protect and prolong the life of the battery, do not charge it for 24
hours or longer at a time.