Table 3-26 Parameters in the CWM Parameters configuration
Item
CRN Auth Type
CWM (CPE WAN
Management)
The following are
the Read-Only
Parameters of
CWM
II. Save
Click Apply to save the settings in the RAM.
To save this configuration changes permanently, enter the
Save & Reboot page, select Save and click Apply to save
new settings.
III. Management Server configuration
Click Management Server configuration to display the
Management Server configuration page.
Table 3-27 shows the parameter explanation of the Management
Server configuration page.
page
You can select an authentication type for CRN
(Connection
drop-down menu. There are three options including
None, Basic and Digest.
Select Enabled to enable the function of CWM.
Select Disabled to disable the function.
This part display the related information of CWM
including Valid Download, Download Command
Key and Reboot Command Key etc.
Huawei Technologies Proprietary
36
Configuration
Request
Notification)
from
the