Table 3-21 shows the parameter explanation of the RIP-edit
page.
Table 3-21 Parameters in the RIP-edit page
Item
Interface Name
RIP Version
Operation Mode
Enabled
II. Save
Click Apply to save the settings in the RAM.
To save this configuration changes permanently, enter the
Save & Reboot page, select Save and click Apply to save
new settings.
3.3.3 Firewall
Click Firewall of Advanced in the navigation bar to display the
Firewall Configuration page.
I. Configuration
Table 3-22 shows the parameter explanation of the Firewall
Configuration page.
Display the current interface name.
You can select a RIP version from the drop-down
menu.
There are three mode including Active, Passive
and Send only.
Check the box to enable RIP on the interface or
uncheck it to disable RIP.
Huawei Technologies Proprietary
32
Configuration