Troubleshooting Checklist; Specifications - Pantech Flex P8010 User Manual

Table of Contents

Advertisement

Appendix
Do not remove a battery from the phone when a memory
x
card is being used. This may damage the data or cause a
malfunction. Pantech is not responsible for any loss of data.
Your phone supports only microSD memory card.(up to
x
32 GB) Some memory cards may not work on your phone
depending on the capacity and manufanturers. Pantech
does not guarantee of its functionality.
You can store photos, videos, documents, MP3 files, and
x
more on a memory card. Keep a memory card with enough
spaces. Your phone cannot recognize a memory card if it
is full.
To remove a memory card from your phone safely, tap
x
Menu > Settings > Storage > Unmound SD card or turn off
the phone before removing.

Troubleshooting checklist

When audio quality is poor: End a call and try again.
When the other party cannot hear you speaking:
Your phone may be set to MUTE. Disable the MUTE function. Or
your hand may be covering the microphone.
When battery life is shorter than usual:
This may happen when you are in an area with low signal
strength. Turn off your phone when it is not in use. Change the
battery when battery energy is exhausted.
When you cannot turn on your phone:
Make sure your battery is charged. Check to see if your phone
works while recharging the battery.
When you are unable to send a message:
Either you are not registered to receive an SMS service, or you
may be in an area where your network service provider cannot
provide such a service.
When you are unable to make a call:
Your phone may be set to "fixed dial." Cancel the "fixed dial"
function. When you are unable to receive a call : Your phone
may be set to "Call forwarding". Cancel the "Call forwarding".
When you are unable to charge the battery:
This may be the result of one of the following three cases.
1. Your charger may be out of order. Contact your nearest
dealer.
2. You may be attempting to use the phone in an overly hot/
cold temperature. Try changing the charging environment.
3. Your battery may have not been connected to the charger
properly. Check the connector.
When you are unable to input data into your Address Book:
Your Address Book memory may be full. Delete some entries
from your Address Book.
When you are unable to select a certain function:
You may not have subscribed to that function, or your network
service provider may be in an area where such service cannot
be provided. Contact your local service provider.

Specifications

Design
Touch Candy Bar
Displays
16 M colors TFT with 4" display 600 x 800(SVGA) pixels in
resolution
Melodies
MP3, AAC / AAC+ / eAAC+, WMA, AMR-NB / ARM-WB / AMR-
WB+, QCELP, EVRC
74

Advertisement

Table of Contents
loading

Table of Contents