HUSTLER TrimStar Operator's Manual page 40

Hide thumbs Also See for TrimStar:
Table of Contents

Advertisement

4. Fill fuel tank(s) with fresh fuel. Run machine at half
speed for 5 minutes, checking operation of the H-Bar
handle. Stop engine and check for oil leaks, loose
fittings and so forth.
At start of new season always check that fresh oil
has been added to machine. If oil is drained at
season's end and not replaced, engine damage will
result.
REV D
5. Tighten any bolts that have loosened and make sure
all hair pins, cotter pins and clevis pins are in place.
®
6. Install all safety shields and review safety precautions
listed in this manual.
7. Check and inflate tires to 8–12 psi (55–83 KPa).
8. Refer to engine manual for more information.
6-2
114510

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents