Inserting The Battery - Sony WRT-8P Operating Instructions Manual

Uhf synthesized transmitter
Hide thumbs Also See for WRT-8P:
Table of Contents

Advertisement

BATT
indication
5
Flashes.
Other
indications in
the display
section do not
appear.
Note
The indicated battery condition may not be
correct if the battery was not new when
installed. If you plan to use the unit for a
long period of time, it is recommended that
you replace the battery with a brand new
one.
Notes on battery
Battery may leak or explode if mistreated.
Be sure to follow these instructions.
• Be sure to install the battery with the
correct polarity.
• The battery is not rechargeable.
• When not using the unit for a long period
of time, remove the battery to avoid
leakage. If the battery does leak, clean all
leakage from the battery compartment
and the unit. Leakage left in the
compartment and the unit may cause poor
battery contact. If there seems to be poor
battery contact, consult your Sony dealer.

Inserting the battery

1
Slide the battery lid to release the lock
(1), and open the battery
compartment (2).
8
Power Supply
Battery status
Almost drained.
The unit does not
turn on when the
POWER switch is
turned ON.
2
Insert a new 6LR61 (9 V) alkaline
battery matching its polarity markings
with those in the battery compartment,
then close the lid.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wrt8p2Wrt8p1U3032U4244

Table of Contents