Using The Ac Adapter; Roaming With Your Phone; Using Your Phone; Placing A Call - LG VN360 User Manual

Using the AC Adapter

To charge the battery, plug the AC Adapter into a standard wall outlet and connect it to the phone via the
I/O Connector on the bottom of the phone.
The battery Charge Status icon flashes during charging. When the battery is fully charged, the battery icon
stops flashing.

Using Your Phone

Placing a Call

When the phone is turned on, check the Signal Strength icon to see of you are in a Service Area or
authorized PCS CDMA provider's service area.
1. Open the Slide.
2. Enter the phone number and press [SEND].
☞Tip! When dialing long distance, it is not necessary to dial a "1" before the area code.
3. When you are finished with your call and press [END] . If the phone is in Active Slide Mode,
closing the Slide will also end the call.

Roaming With Your Phone

Your Phone is you can use it to make and receive calls in many places.
Setting Your Phone's Mode
Your Phone allows you to control your ability to roam. (See "Set Mode")