Battery Capacity; Using The Ac Adapter; Using Your Phone; Placing A Call - LG -LX1200 User Manual

Hide thumbs Also See for LG-LX1200:
Table of Contents

Advertisement

Battery Capacity

Your Sprint PCS LG-SP3100 Equipped with a Lithium Ion (LiIon) battery. It allows you to recharge your
battery before it is fully drained. The battery provides approximately
hours of continuous digital
talk time or approximately
of continuous digital standby time.
Note: Long backlight settings affect the battery's talk and standby times.
When the battery reaches 5% of its capacity, the battery icon blinks. When there is about one minute of
talk time left, the phone sounds an audible alert every 30 seconds and then powers down.
If the battery's charge is completely run down, it takes 2 to 3 hours to fully recharge. It is not necessary to
let the battery completely run down before recharging.
130hours
To charge your batteries, use only Sprint PCS-approved charging accessories.

Using the AC Adapter

To charge the battery, plug the AC Adapter into a standard wall outlet and connect it to the phone via the
Call
I/O Connector on the bottom of the phone. Alternatively, you can place the phone in the charging cradle
provided with your phone and connect the AC Adapter to the back of the cradle.
The battery Charge Status icon flashes during charging. When the battery is fully charged, the battery
icon stops flashing.
3.25

Using Your Phone

Placing a Call

When the phone is turned on, check the Signal Strength icon to see of you are in a Sprint PCS Service
Area or authorized PCS CDMA provider's service area.
1. Open the Flip.
2. Enter the phone number, highlight
Call
and press
.
OK
¢ Ñ T ip! When dialing long distance, it is not necessary to dial a "1" before the area code.
- 9 -

Advertisement

Table of Contents
loading

Table of Contents