Leveling The Turntable; Using The Clamp, Starting The Motor; Changing The Speed - NAD C 558 Owner's Manual

SETUP
ASSEMBLY AND INSTALLATION

LEVELING THE TURNTABLE

Three precision adjustable damped feet are mounted under the turntable
for leveling the turntable. Once the turntable is in final position, put the
supplied spirit level on the sub-chassis, and then level the turntable by
screwing or unscrewing the feet as needed. It is advisable to check level
from several positions on the subchassis.

USING THE CLAMP, STARTING THE MOTOR,

CHANGING THE SPEED

Using the clamp – after placing a record on the platter, place the record
clamp on the spindle and record. Do not screw the clamp for playback.
CONTROLING THE TURNTABLE
•
To start rotation of the platter, press the button ON/OFF switch (1)
•
To play 45 r.p.m., put the drive belt (13) over the larger diameter part
of the motor pulley using accessory toll provided. To revert to 33r.p.m.
repeat the proceedings using the smaller step on the pulley.
8