6.4. Connection of wiring
Remove the control box cover and install the connection cable.
(1) Remove the control box cover and install each connection cable.
(2) Connect the connection cable, with the binder.
Binder
(Accessories)
(3) Install control box cover.
Do not bundle the remote control cable, or wire the remote control cable in parallel, with the indoor unit connection cable (to the
outdoor unit) and the power supply cable. It may cause erroneous operation.
En-12
Screw
L, N: Power supply cable
Control box cover
CAUTION
Remote control cable
Y1: Red
Y2: White
Y3: Black
Binder
(Accessories)
X1, X2: Transmission cable