Setting Up Your Viewstation - Polycom Viewstation 128 User Manual

Setting Up Your ViewStation

Connecting the ViewStation is easy. The cable connectors are
color-coordinated with the corresponding connectors on the back of the
ViewStation. To hook up your ViewStation, use your QuickStart booklet as a
guide and follow these steps:
1. Place the ViewStation unit on top of the monitor as shown below. Make
sure the front lip of the unit hangs over the edge of the monitor.
2. Center the microphone pod on a flat surface between the meeting
participants and the ViewStation. If you are using two microphone pods,
connect them to each other and to the ViewStation. One of these
microphones must be ordered as a secondary microphone.
ViewStation User's Guide
Getting Started
15