Using Voicestation 100 - Polycom VoiceStation 100 Installation Instructions And User Manual

6
Place VoiceStation 100 in the center
of the room on a flat, stable surface and
press the Volume Up and Volume Down
buttons to adjust the Ringer.
The Ringer has three modes: High, Low,
and Off. The Ringer sounds when you
press the Volume buttons to indicate
current status.
Note: when the On/Off indicator light is
lit, the Volume buttons control the sound
level of the speaker. When the On/Off
indicator light is off, the Volume buttons
control the ringer volume.
redial
on/off
fl ash
hold
To Place a Call
Press On/Off to get a dial tone,
then dial the number.
7
Press the On/Off button
to get a dial tone.
If you don't hear a dial tone, you
may not be connected to an analog
telephone line. For assistance, contact
your telephone system administrator
or a service technician.

Using VoiceStation 100

volume
up/down
mute
3