Table of Contents
Advertisement
GAUGE FOR THE AFTER-SALES SERVICE
Gauge No. 11684
Gauge No. 11685
Gauge No. 11686
Dimension
Use
84.3mm
For the adjustment of initial point for
Blue & Yellow Decorative Thread Guides
1.2mm
and for setting position of the DECO UNIT
sensor (Page.23-Fig.1,Page.27b-Fig.6,7,9)
3.5mm
For the setting of stitch length unit
(setting the both gears(Page.23-Fig.1B&C))
6mm
Height of Yellow Decorative Thread Guide
from thesurface of needle plate
84.3
Dimension
Use
3.98mm
For the setting of Differential Feed UNIT
(setting the both gears)
(Page.17-Fig.1-C&D)
50
Dimension
Use
6.8mm
For the setting of Differential Feed UNIT
(setting the position of feed rock lever,back
and differential regulator slide block
(Page.17-Fig.2-B))
1.2
G2
Advertisement
Table of Contents
