Table of Contents
Advertisement
Section 4 - Con guration
If Smart Connect is Disabled the following options are available:
2.4GHz / Primary 5GHz / Secondary 5GHz
Enable or disable the 2.4 GHz and 5 GHz wireless networks.
Status:
Create a name for your wireless network using up to 32 characters.
Wi-Fi Name (SSID):
Create a password to use for wireless security.
Password:
Advanced Settings
Choose None, WEP, or WPA/WPA2-Personal (recommended).
Security Mode:
Select the desired wireless networking standards to use.
802.11 Mode
The available options for the 2.4 GHz wireless network are Mixed
(2.4 GHz):
802.11b/g/n, Mixed 802.11g/n, 802.11n only.
Select the desired wireless networking standards to use.
802.11 Mode
The available options for the 5 GHz wireless network are Mixed
(5 GHz):
802.11a/n/ac, Mixed 802.11n/ac, 802.11ac only, Mixed 802.11a/n,
Mixed 802.11n only, or 802.11a only.
Select the desired channel. The default is Auto (recommended).
Wi-Fi Channel:
Select the desired wireless transmission power.
Transmission
Power:
Select Auto 20/40 if you are using both 802.11n and non-802.11n
Channel Width
devices, or select 20 MHz if you are not using any 802.11n devices.
(2.4 GHz):
Select Auto 20/40/80 if you are using 802.11ac, 802.11n, and 802.11a
Channel Width
devices, select Auto 20/40 if you are using 802.11n and 802.11a
(5 GHz):
devices, or select 20 MHz if you are only using 802.11a devices.
D-Link DIR-883 User Manual
Wireless - Smart Connect Disabled
Wireless
changes made in this section will need to be updated on your wireless device.
2.4GHz
Enabled
Password:
Wi-Fi Channel:
Auto
Transmission Power:
Channel Width:
Enabled
Always Enable
Enabled
Password:
Wi-Fi Channel:
Auto
Transmission Power:
Channel Width:
Always Enable
Features
Management
56
Advertisement
Table of Contents
