Table of Contents
Advertisement
SOFTWARE SETUP
Printing setpoints and
actual values
Printing actual values
from a connected
device
3–26
The EnerVista 3 Series Setup software allows the user to print partial or complete lists of
setpoints and actual values. Use the following procedure to print a list of setpoints:
1.
Select a previously saved setpoints file in the File pane or establish communications
with a 350 device.
2.
From the main window, select the Offline > Export Settings File menu item.
3.
The Print/Export Options dialog box will appear. Select Settings in the upper section
and select either Include All Features (for a complete list) or Include Only Enabled
Features (for a list of only those features which are currently used) in the filtering
section and click OK.
4.
The process for Offline > Print Preview Settings File is identical to the steps above.
5.
Setpoint lists can be printed in the same manner by right clicking on the desired file (in
the file list) or device (in the device list) and selecting the Print Device Information or
Print Settings File options.
A complete list of actual values can also be printed from a connected device with the
following procedure:
1.
Establish communications with the desired 350 device.
2.
From the main window, select the Online > Print Device Information menu item
3.
The Print/Export Options dialog box will appear. Select Actual Values in the upper
section and select either Include All Features (for a complete list) or Include Only
Enabled Features (for a list of only those features which are currently used) in the
filtering section and click OK.
Actual values lists can be printed in the same manner by right clicking on the desired
device (in the device list) and selecting the Print Device Information option
350 FEEDER PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 3: INTERFACES
Advertisement
Table of Contents
