Polycom 2000 Interface Manual page 9

Assign Extension Numbers
The Wireless Telephone Display
PN: 1725-36138-001_E.doc
The wire contractor should inform the system administrator which
port numbers have been designated for the handsets.
The system administrator may use the Extension Assignments
Worksheet at the end of this document to track the port numbers,
extensions, users, and features assigned to handsets.
The SpectraLink Wireless Telephone will display the telephone
number as it is dialed.
The NEAX ETJ-16DC-2 has a two-line by 20 character display. The
handset display is 2 lines by 16 characters; therefore, some NEAX
messages will be truncated when displayed on the handset. The first
two and last two characters will be truncated.
Certain characters may be used by the system that are not
implemented in the handset. Flashing characters are not implemented
on the handset, nor is rolling or scrolling of text.
Handset indicators
Line indicators are associated with line access keys. Status indicators
or icons are associated with voicemail, low battery function, other
functions, and service interruption. A left or right arrow is displayed
when the screen can be toggled either left or right to display more
characters.
When lines are programmed as shown on the key-map diagrams, the
numeral icons on the handset display will be mapped to any deskset
LEDs associated with the corresponding feature keys. The line icons
will be displayed as follows:
Line State Handset Line Status Icon State
On-hook Off
Off-hook On
Ringing Fast flash
On hold Slow flash
Plan the Interface
9