Installation Of Backup Batteries - Motorola MOSCAD-M Owner's Manual

Installation of Backup Batteries

The backup battery should not be installed before the unit is
connected to the main power supply. This may cause the
battery to drain.
1. Place 3 "C" size alkaline batteries into the carton cylinder, each in the same direction, as
shown in Figure 7 below.
2. Place the cylinder with the batteries into the battery case in the direction indicated on the
unit (see Figure 8 below).
Figure 7
Backup Battery Cylinder and 3 Backup C Batteries
Figure 8
Installation of Backup Batteries
9
Installation