How to setup the TV
Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV's ANT.
terminal (refer to page19-20).
Connect the AC power cord at the back of the TV and connect the power cord to wall
outlet.
Insert the 2 batteries supplied in remote control.
Step1
Slide the back cover up to open the
battery compartment of the remote
control.
Step2
Insert two AAA size batteries.
Make sure to match the (+) and
( - ) ends of the batteries with
the (+) and ( - ) ends indicated
in the battery compartment.
Slide the cover back into place.
Do not use caustic cleaners (porcelain, stainless steel, toilet, or oven cleaner
etc.) on the remote, as it may suff er damage.
Connect other an external AV device (refer to page21-27).
Chapter 1 Introducing the LCD TV
9