Soleus Air DMG-135-60 Operating Instructions Manual page 8

OPERATING INSTRUCTIONS
Auto On- To program the unit to automatically turn on, press the TIME button repeatedly until Timer function
is displayed while the unit is off. Press + or - to increase or decrease the timer in 1 hour increments until the
desired time increment is displayed. After 5 seconds, the displayed time increment will flash, indicating that it
has been set. Once the set time increment is reached, the unit will automatically turn on.
Auto Shut-Off- To program the unit to automatically turn off, press the TIME button repeatedly until Timer
function is displayed while the unit is on. Press + or - to increase or decrease the timer in 1 hour increments
until the desired time increment is displayed. After 5 seconds, the displayed time increment will flash, indicat-
ing that it has been set. Once the set time increment is reached, the unit will automatically turn off.
7) SD Card Recording - Insert an SD Card into the SD Card Slot with the product label on the SD Card
facing down. When an SD Card is inserted and the unit is powered on, the unit will automatically record the
Date, Time, Temperature, Relative Humidity, Total Operating Time, and Electricity Consumption once every
hour.
1) SD Card Report Viewing - Place the SD Card into the SD Card Slot on a computer. Open the SD Card
folder to view all stored reports. Click on the file and open to view.
2) Automatic Draining - The dehumidifier will automatically drain when the internal tank is full during nor-
mal operation. Be sure that the Drain Tube is installed or collect bucket is placed below the Drain Port at all
time during operation. (See page 6 for Drain Tube installation instructions)
CONTROL PANEL OPERATION
Set Timer
PRODUCT USE AND OPERATION